menu
Your Cart

G-Trap™ CM Agarose Fast Flow


G-Trap™ CM Agarose Fast Flow is ready to use prepacked column used for separation of proteins and other biomolecules based on charge. The resin in G-Trap™ CM Agarose Fast Flow is a weak cation exchanger composed of highly crosslinked 6% agarose beads coupled with carboxymethyl (CM) weak cation exchange group. The proteins carrying net possitive charge will bind to the resin and protein carrying net negative charge will not bind and will come out in flow through fraction.

 

There are other  G-Trap™ Ion Exchange Agarose Fast Flow Columns available in 1 ml and 5 ml column volume namely G-Trap™ SP Agarose Fast Flow, G-Trap™ DEAE Agarose Fast Flow and G-Trap™ Q Agarose Fast Flow. G-Trap™ SP Agarose Fast Flow contains cation exchanger resin and G-Trap™ DEAE Agarose Fast Flow and G-Trap™ Q Agarose Fast Flow contains anion exchanger resin. G-Trap™ Ion Exchange Selection Kit is available for initial screening for the appropriate ion exchanger to purify target protein.

 

G-Trap™ Ion Exchange Agarose Fast Flow Columns are ready to use prepacked columns for separation of biomolecules on the basis of charge. G-Trap™ Ion Exchange Agarose Fast Flow Columns are used for method scouting, separation or purification of biomolecules, sample concentration and sample cleanup for charged molecules. Biomolecules that carry net charge opposite to that of ion-exchanger bind to that ion exchanger and are thus separated from bulk molecules in the sample.

 

The  properties of the G-Trap™ CM Agarose Fast Flow resin and the column are listed below

 

G-Trap™ CM Agarose Fast Flow resin

Ion Exchanger: Weak cation exchanger

Matrix: Cross-linked agarose beads, 6%

Bead size: 45-165 µm

Ligand: Carboxymethyl

Ionic Capacity: 0.09-0.13 mmol (H+)/ml

Binding Capacity: 50 mg lysozyme/ ml medium

pH stability Working Range: 4-12

pH stability Cleaning-in-Place (CIP): 2-14

Maximum Flow Velocity: 450cm/h

Recommended Flow rate: 1 ml/ min and 5 ml/ min for 1 ml and 5 ml column respectively

Maximum Pressure: 0.3MPa

Exclusion limit(globular proteins): 4 x 106

Chemical Stability: Stable to all commonly used aqueous buffers:1 M NaOH, 8M urea, 8M guanidine hydrochloride, 70% ethanol

Storage Conditions: 4 to 30°C, 20% Ethanol

 
G-Trap™ CM Agarose Fast Flow​, 1 ml columns

Column Volume: 1 ml

Columns Dimension: 0.7 x 2.5 cm

Column Harware Pressure Limit: 0.5 MPa

Column Hardware: Polypropylene (Biocompatible)

 

G-Trap™ CM Agarose Fast Flow​, 5 ml columns

Column Volume: 5 ml

Columns Dimension: 1.6 x 2.5 cm

Column Harware Pressure Limit: 0.5 MPa

Column Hardware: Polypropylene (Biocompatible)

 

Application(s): 

  • G-Trap™ CM Agarose Fast Flow is ready to use prepacked column used for separation of proteins and other biomolecules based on charge.  The resin in G-Trap™ CM Agarose Fast Flow is a weak cation exchanger where carboxymethyl (CM) weak cation exchange group is coupled to agarose. The proteins carrying net possitive charge will bind to the resin and protein carrying net negative charge will not bind and will come out in flow through fraction.

 

Protocol
786-1010
786-1011
Material Safety Data Sheet
786-1010
English_US
Danish
Dutch
English_UK
French
German
Spanish
Norwegian
Portuguese
Finnish
Swedish
Polish
786-1011
English_US
Danish
Dutch
English_UK
French
German
Spanish
Norwegian
Portuguese
Finnish
Swedish
Polish

Write a review

Note: HTML is not translated!
Bad Good
Captcha

CONNECT WITH US