menu
Your Cart

G-Trap™ GT-100 Desalting Column


G-Trap™ GT-100 Desalting Column is prepacked ready to use column for separation of low molecular weight substances from high molecular weight substances based on size exclusion chromatography. 

 

G-Trap™ GT-100 Desalting Columns are mostly used for removal of salt or buffer exchange before or after different chromatographic steps. They can also be used for separation of proteins based on their sizes.

 

Other desalting columns available are G-Trap™ GT-600 Desalting Column and G-Trap™ GT-1200 Desalting Column in 1 ml and 5 ml Column Volume.

 

The properties of the G-Trap™ GT-100 Desalting Column resin and the column are listed below

 

G-Trap™ GT-100 Desalting Column resin 

Bead size: 55-165 µm

Void volume: ~0.3 ml for 1 ml column and ~1.5 ml for 5 ml column

Sample Load volume: 0.03 ml- 0.3 ml for 1 ml column and 0.75-1.5 ml for 5 ml column

Exclusion limit (Mr): 700

Recommended Flow rate: 1 ml/min for 1 m column and 3 ml/min for 5 ml column

Chemical stability: All commonly used buffers, 8M urea, 6M guanidine hydrochloride and all non-ionic detergents. Lower alcohols such as methanol, ethanol and propanol can be added to buffers at lower than 25 V/V %

pH stability: 2 to 13

Storage: 20 % ethanol at 4°C t 30°C

 

G-Trap™ GT-100 Desalting Column, 1 ml column

Column Volume: 1 ml

Columns Dimension: 0.7 x 2.5 cm

Column Harware Pressure Limit: 0.5 MPa

Column Hardware: Polypropylene (Biocompatible)

 

G-Trap™ GT-100 Desalting Column, 5 ml column

Column Volume: 5 ml

Columns Dimension: 1.6 x 2.5 cm

Column Harware Pressure Limit: 0.5 MPa

Column Hardware: Polypropylene (Biocompatible)

 

Application(s): 

  • G-Trap™ GT-100 Desalting Column is prepacked ready to use column for separation of low molecular weight substances from high molecular weight substances based on size exclusion chromatography. G-Trap™ GT-100 Desalting Columns are mostly used for removal of salt or buffer exchange before or after different chromatographic steps. They can also be used for separation of proteins based on their sizes.
Protocol
786-1025
786-1026
Material Safety Data Sheet
786-1025
English_US
Danish
Dutch
English_UK
French
German
Spanish
Norwegian
Portuguese
Finnish
Swedish
Polish
786-1026
English_US
Danish
Dutch
English_UK
French
German
Spanish
Norwegian
Portuguese
Finnish
Swedish
Polish

Write a review

Note: HTML is not translated!
Bad Good
Captcha

CONNECT WITH US